Telephone +44 (0) 1342 330 470

Monday to Thursday: 08.30 to 17.00 (GMT)
Friday: 08.30 to 12.45 (GMT)

Catalog Advanced Search

3 item(s) were found using the following search criteria

  • Manufacturer: Riedon

Don't see what you're looking for? Modify your search

3 Item(s)

per page

Set Descending Direction
  1. MSR Bare Metal Element Resistor Series

    MSR Bare Metal Element Resistor Series

    The MSR series from Riedon uses a bare metal element in an all-welded construction for through-hole circuit board mounting to provide resistance values from 5mΩ to 100mΩ, while also achieving low inductance (<10nH) and low TCR (±20ppm/°C). MSR resistors are available with a power rating up to 5W and tolerances available down to ±1%.

    • Resistances from 0.005Ω to 0.100Ω
    • Economical bare metal element with all welded construction
    • Tolerances down to ±1%
    • Resistance wire TCR of ±20ppm/°C
    • Low inductance (<10nH)
    More Info
  2. RS Precision Current / DC Current Shunt Resistor Series

    RS Precision Current / DC Current Shunt Resistor Series

    The RS series of precision current shunts from Riedon have been especially designed for DC ammeters and similar instruments. These base-mounted shunts offer current ratings from 5A up to 1200A with outputs of 50mV, 100mV or custom options available. They utilise a Manganin® resistive element and have a standard tolerance of ±0.25%. The RS precision shunt series is also UL listed.

    • Current ratings of 5A to 1200A
    • Base mounted shunt
    • 50mV, 100mV or custom output options available
    • Standard tolerance of ±0.25%
    • Manganin® resistive element
    • UL listed
    More Info
  3. S & SL Surface Mount Wirewound Resistor Series

    S & SL Surface Mount Wirewound Resistor Series

    The S and SL series from Riedon utilise wirewound technology to offer great precision, high temperature ratings, low temperature coefficient and superior surge handling capabilities, all within a surface mountable package. With resistance values between 0.005Ω and 50kΩ, they are available with non-inductive windings (type SN) and power ratings of up to 4W (at +70°C). The S and SL wirewound resistors offer tolerances down to ±0.01%, TCR to ±20ppm/°C (type and resistance value dependent) and high temperature ratings of up to +275°C.

    • Resistances from 0.005Ω to 50kΩ (model dependent)
    • Wirewound construction with non-inductive windings available (type SN)
    • High power rating of up to 4W (type S-5)
    • Tolerances down to ±1%
    • TCR to ±20ppm/°C (type and resistance value dependent)
    • Superior surge handling capabilities
    • Flame resistant UL 94V-0
    More Info

3 Item(s)

per page

Set Descending Direction