Precision / Ultra-Precision

Precision / Ultra-Precision

At Rhopoint Components we have a wide selection of high precision and ultra precision resistors in an array of styles, packages, and covering virtually any resistance value in both surface-mount (SMD) and through-hole (THT) options. From traditional wirewound resistors handmade to the highest standard, to new technology chip resistors and innovative resistive materials, we can achieve very low tolerances, TCRs and long term stability. Our technical team is always ready to discuss your project, however big or small, to find the right solution for your application, whatever your priorities.

Can't find what you're looking for? Contact us, we can offer customised solution to meet all your needs, often at no extra cost or MOQ.

Show:
Sort By:

Alpha FLA Series

The FLA conformally coated resistor series from Alpha Electronics offers a very precise resistor with a resistance range from 10Ω up to 100kΩ all in a small through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Conformally coated through-hole resistor
  • Available in any resistance between 10Ω and 100kΩ
  • Tight tolerance options as low as ±0.05% available for resistances between 100Ω and 100kΩ
  • Tight TCR options available of ±2.5 ppm/°C or ±5 ppm/°C (from -25°C up to +125°C)
  • Maximum working voltage of 250V
  • Power rating of 0.125W (at +70°C)
  • Maximum rated operating temperature +70°C
  • Working temperature from -25°C up to +155°C

The Alpha Electronics FLA precision resistor series have been designed with terminals that are easy for insertion into the PCB.

The FLB series has a pin pitch of 2.54 ±0.25mm.

Alpha's Bulk Metal® foil resistor technology means that these conformally coated, through-hole, precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

The below table gives the full specifications for each resistor model available including the Alpha FLA series:

Alpha FLA Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring at the point 2.5 ±1.0mm below the shoulder of the leads

£0.00

Alpha FLB Series

The FLB conformally coated resistor series from Alpha Electronics offers a very precise resistor with a resistance range from 10Ω up to 150kΩ all in a small through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Conformally coated through-hole resistor
  • Available in any resistance between 10Ω and 150kΩ
  • Tight tolerance options as low as ±0.05% available for resistances between 100Ω and 150kΩ
  • Tight TCR options available of ±2.5 ppm/°C or ±5 ppm/°C (from -25°C up to +125°C)
  • Maximum working voltage of 300V
  • Power rating of 0.25W (at +70°C)
  • Maximum rated operating temperature +70°C
  • Working temperature from -25°C up to +155°C

The Alpha Electronics FLB precision resistor series have been designed with terminals that are easy for insertion into the PCB.

The FLB series has a pin pitch of 2.54 ±0.25mm.

Alpha's Bulk Metal® foil resistor technology means that these conformally coated, through-hole, precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

The below table gives the full specifications for each resistor model available including the Alpha FLB series:

Alpha FLB Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring at the point 2.5 ±1.0mm below the shoulder of the leads

£0.00

Alpha FLC Series

The FLC conformally coated resistor series from Alpha Electronics offers a very precise resistor with a resistance range from 10Ω up to 200kΩ all in a small through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Conformally coated through-hole resistor
  • Available in any resistance between 10Ω and 200kΩ
  • Tight tolerance options as low as ±0.05% available for resistances between 100Ω and 200kΩ
  • Tight TCR options available of ±2.5 ppm/°C or ±5 ppm/°C (from -25°C up to +125°C)
  • Maximum working voltage of 300V
  • Power rating of 0.25W (at +70°C)
  • Maximum rated operating temperature +70°C
  • Working temperature from -25°C up to +155°C

The Alpha Electronics FLC precision resistor series have been designed with terminals that are easy for insertion into the PCB.

The FLC series has a pin pitch of 5.08 ±0.25mm.

Alpha's Bulk Metal® foil resistor technology means that these conformally coated, through-hole, precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

The below table gives the full specifications for each resistor model available including the Alpha FLC series:

Alpha FLC Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring at the point 2.5 ±1.0mm below the shoulder of the leads

£0.00

Alpha MA Series

The MA ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 1Ω up to 200kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 3.81 ±0.25mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Ultra-precision transfer moulded resistor
  • Available in any resistance between 1Ω and 200kΩ
  • Through-hole package with a pin pitch of 3.81 ±0.25mm
  • Tight tolerance options as low as ±0.005% available for resistances between 30Ω and 200kΩ
  • Tight TCR options available of ±1 ppm/°C (from 0°C up to +65°C, between 30Ω up to 200kΩ) or ±2.5 ppm/°C (from -55°C up to +125°C, between 30Ω up to 200kΩ)
  • Maximum working voltage of 300V
  • Power rating of 0.3W (at +125°C) or 0.2W (at 150kΩ or above)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +175°C

Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.

The below table gives the full specifications for each resistor model available including the Alpha MA series:

Alpha MA Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C

£0.00

Alpha MB Series

The MB ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 5Ω up to 400kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 7.5 ±0.5mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Ultra-precision transfer moulded resistor
  • Available in any resistance between 1Ω and 200kΩ
  • Through-hole package with a pin pitch of 7.5±0.5mm
  • Tight tolerance options as low as ±0.005% available for resistances between 30Ω and 400kΩ
  • Tight TCR options available of ±1 ppm/°C (from 0°C up to +65°C, between 30Ω and 400kΩ) or ±2.5 ppm/°C (from -55°C up to +125°C, between 30Ω and 400kΩ)
  • Maximum working voltage of 350V
  • Power rating of 0.5W (at +125°C) or 0.3W (at 200kΩ or above)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +175°C

Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.

The below table gives the full specifications for each resistor model available including the Alpha MB series:

Alpha MB Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C

£0.00

Alpha MC Series

The MC ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 1Ω up to 200kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 5.08 ±0.25mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Ultra-precision transfer moulded resistor
  • Available in any resistance between 1Ω and 200kΩ
  • Transfer moulded through-hole package with a pin pitch of 5.08 ±0.25mm
  • Tight tolerance options as low as ±0.005% available for resistances between 30Ω and 200kΩ
  • Tight TCR options available of ±1 ppm/°C (from 0°C up to +65°C, between 30Ω and 200kΩ) or ±2.5 ppm/°C (from -55°C up to +125°C, between 30Ω and 200kΩ)
  • Maximum working voltage of 300V
  • Power rating of 0.3W (at +125°C) or 0.2W (at 150kΩ or above)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +175°C

Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.

The below table gives the full specifications for each resistor model available including the Alpha MC series:

Alpha MC Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C

£0.00

Alpha MD Series

The MD ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 5Ω up to 80kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 5.08 ±0.25mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.

  • Ultra-precision transfer moulded resistor
  • Available in any resistance between 5Ω and 80kΩ
  • Transfer moulded through-hole package with a pin pitch of 5.08 ±0.25mm
  • Tight tolerance options as low as ±0.005% available for resistances between 30Ω and 80kΩ
  • Tight TCR options available of ±1 ppm/°C (from 0°C up to +65°C, between 100Ω and 80kΩ) or ±2.5 ppm/°C (from -55°C up to +125°C, between 30Ω and 80kΩ)
  • Maximum working voltage of 250V
  • Power rating of 0.125W (at +125°C)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +175°C

Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.

These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.

The below table gives the full specifications for each resistor model available including the Alpha MD series:

Alpha MD Specifications

* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C

£0.00

Alpha MP Series

The MP ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 30kΩ with tight tolerances down to +0.05% (100Ω to 30kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. The Alpha MP series J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.

  • Surface-mount ultra-precision resistor
  • Available in any resistance between 30Ω and 30kΩ
  • Moulded package with J-lead terminations
  • The resistive element is mechanically isolated from the contact terminals
  • Tight tolerance of ±0.05% for resistances between 100Ω and 30kΩ
  • Tight TCR of ±5 ppm/°C (from -55°C up to +125°C, between 100Ω and 30kΩ) or ±10 ppm/°C (from -55°C up to +125°C, between 30Ω and 100Ω)
  • Maximum working voltage of 50V
  • Maximum working current of 0.35A
  • Power rating of 0.1W (at +125°C)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +175°C

Alpha's MP surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.

These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.

The below table gives the full specifications for each resistor model available including the Alpha MP series:

Alpha MP Specifications

* Please contact us for tighter tolerances

£0.00

Alpha MPH Series

The MPH ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 30kΩ with tight tolerances down to +0.05% (100Ω to 30kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. Expanding on the standard Alpha MP series, the MPH series offers gold-plated J-lead terminals making them suitable for higher temperatures of up to +200°C. The gold-plated J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.

  • Surface-mount ultra-precision resistor
  • Available in any resistance between 30Ω and 30kΩ
  • Surface-mount moulded package with gold-plated J-lead terminations for high temperatures of up to +200°C
  • The resistive element is mechanically isolated from the contact terminals
  • Tight tolerance of ±0.05% for resistances between 100Ω and 30kΩ
  • Tight TCR of ±5 ppm/°C (from -55°C up to +125°C, between 100Ω and 30kΩ) or ±10 ppm/°C (from -55°C up to +125°C, between 30Ω and 100Ω)
  • Maximum working voltage of 50V
  • Maximum working current of 0.35A
  • Power rating of 0.1W (at +125°C)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +200°C

Alpha's MPH surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.

These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.

The below table gives the full specifications for each resistor model available including the Alpha MPH series:

Alpha MPH Specifications

* Please contact us for tighter tolerances

£0.00

Alpha MQ Series

The MQ ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 60kΩ with tight tolerances down to +0.05% (100Ω to 60kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. The Alpha MQ series J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.

  • Surface-mount ultra-precision resistor
  • Available in any resistance between 30Ω and 60kΩ
  • Surface-mount moulded package with J-lead terminations
  • The resistive element is mechanically isolated from the contact terminals
  • Tight tolerance of ±0.05% for resistances between 100Ω and 60kΩ
  • Tight TCR of ±5 ppm/°C (from -55°C up to +125°C, between 100Ω and 60kΩ) or ±10 ppm/°C (from -55°C up to +125°C, between 30Ω and 100Ω)
  • Maximum working voltage of 100V
  • Maximum working current of 0.35A
  • Power rating of 0.125W (at +125°C)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +175°C

Alpha's MQ surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.

These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.

The below table gives the full specifications for each resistor model available including the Alpha MQ series:

Alpha MQ Specifications

* Please contact us for tighter tolerances

£0.00

Alpha MQH Series

The MQH ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 60kΩ with tight tolerances down to +0.05% (100Ω to 60kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. Expanding on the standard Alpha MQ series, the MQH series offers gold-plated J-lead terminals making them suitable for higher temperatures of up to +200°C. The gold-plated J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.

  • Surface-mount ultra-precision resistor
  • Available in any resistance between 30Ω and 60kΩ
  • Surface-mount moulded package with gold-plated J-lead terminations for high temperatures of up to +200°C
  • The resistive element is mechanically isolated from the contact terminals
  • Tight tolerance of ±0.05% for resistances between 100Ω and 60kΩ
  • Tight TCR of ±5 ppm/°C (from -55°C up to +125°C, between 100Ω and 60kΩ) or ±10 ppm/°C (from -55°C up to +125°C, between 30Ω and 100Ω)
  • Maximum working voltage of 100V
  • Maximum working current of 0.35A
  • Power rating of 0.125W (at +125°C)
  • Maximum rated operating temperature +125°C
  • Working temperature from -65°C up to +200°C

Alpha's MQH surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.

These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.

The below table gives the full specifications for each resistor model available including the Alpha MQH series:

Alpha MQH Specifications

* Please contact us for tighter tolerances

£0.00

Alpha TLA Series

The TLA conformally coated resistor series from Alpha Electronics further expands their resistor range offerings by utilising thin film resistor technology to allow for larger resistance values of up to 5MΩ. The TLA series offers a precise resistor with a resistance range from 100kΩ up to 5MΩ all in a small through-hole package with low temperature coefficients down to ±5 ppm/°C (between -25°C and +125°C) as well as tolerances down to ±0.05%.

  • Conformally coated thin film through-hole resistor
  • Available in any resistance between 100kΩ and 5MΩ
  • Tight tolerance options as low as ±0.05% available over the whole resistance range
  • Tight TCR options available as low as ±5 ppm/°C (from -25°C up to +125°C)
  • Maximum working voltage of 250V
  • Power rating of 0.125W (at +70°C)
  • Maximum rated operating temperature +70°C
  • Working temperature from -25°C up to +155°C

The Alpha Electronics TLA thin film precision resistor series has been designed with terminals that are easy for insertion into the PCB.

The TLA series offers a pin pitch of 2.54 ±0.25mm.

The below table gives the full specifications for each resistor model available including the Alpha TLA series:

Alpha TLA Specifications

* Symbols parenthesized are for part number composition

£0.00

Alpha TLC Series

The TLC conformally coated resistor series from Alpha Electronics further expands their resistor range offerings by utilising thin film resistor technology to allow for larger resistance values of up to 10MΩ. The TLC series offers a precise resistor with a resistance range from 200kΩ up to 10MΩ all in a small through-hole package with low temperature coefficients down to ±5 ppm/°C (between -25°C and +125°C) as well as tolerances down to ±0.02%.

  • Conformally coated thin film through-hole resistor
  • Available in any resistance between 200kΩ and 10MΩ
  • Tight tolerance options as low as ±0.02% available over the whole resistance range
  • Tight TCR options available as low as ±5 ppm/°C (from -25°C up to +125°C)
  • Maximum working voltage of 300V
  • Power rating of 0.25W (at +70°C)
  • Maximum rated operating temperature +70°C
  • Working temperature from -25°C up to +155°C

The Alpha Electronics TLC thin film precision resistor series has been designed with terminals that are easy for insertion into the PCB.

The TLC series offers a pin pitch of 5.08 ±0.25mm.

The below table gives the full specifications for each resistor model available including the Alpha TLC series:

Alpha TLC Specifications

* Symbols parenthesized are for part number composition

£0.00

Caddock MK227 Series

The MK227 precision power film radial leaded resistor series from Caddock offers a resistance range from 1Ω up to 2MΩ, a power rating of 0.5W and a voltage rating of 200V. The MK227 series has a tolerance of ±1.0% as standard with options down to ±0.1% on resistances of 30Ω or higher, and also a TCR of ±50 ppm/°C for resistance values of 5Ω and above. The MK resistor series is constructed with Caddock's Micronox® resistance films fired onto a solid ceramic substrate.

  • Compact rectangular power film radial leaded resistor with standard lead spacing
  • Available in any resistance between 1Ω and 2MΩ
  • Utilises Caddock's Micronox® resistance film technology
  • Utilises Caddock's non-inductive design
  • Tolerance of ±1.0% as standard with non-standard options down to ±0.1% from 30Ω and above
  • TCR of ±50 ppm/°C from 5Ω and above (between -15°C and +105°C)
  • Maximum working voltage of 200V
  • Maximum power rating of 0.5W
  • Operating temperature of between -40°C and +150°C

The MK200 and MK700 series of resistors are the RoHS equivalent versions of the older non-RoHS MK100 and MK600 series. These resistors have pure matte Tin (Sn) lead finish optimised for use in commercial and industrial applications.

With their compact design, it is easier to achieve greater packaging densities without the need for leaving extra space where resistor value changes can require larger resistors or non-uniform lead spacing.

The below table gives the specifications available for the complete MK200 resistor series including the MK227:

Caddock MK200 Specifications

£0.00

Caddock MK232 Series

The MK232 precision power film radial leaded resistor series from Caddock offers a resistance range from 1Ω up to 5MΩ, a power rating of 0.75W and a voltage rating of 400V. The MK232 series has a tolerance of ±1.0% as standard with options down to ±0.1% on resistances of 30Ω or higher, and also a TCR of ±50 ppm/°C for resistance values of 5Ω and above. The MK resistor series is constructed with Caddock's Micronox® resistance films fired onto a solid ceramic substrate.

  • Compact rectangular power film radial leaded resistor with standard lead spacing
  • Available in any resistance between 1Ω and 5MΩ
  • Utilises Caddock's Micronox® resistance film technology
  • Utilises Caddock's non-inductive design
  • Tolerance of ±1.0% as standard with non-standard options down to ±0.1% from 30Ω and above
  • TCR of ±50 ppm/°C from 5Ω and above (between -15°C and +105°C)
  • Maximum working voltage of 400V
  • Maximum power rating of 0.75W
  • Operating temperature of between -40°C and +150°C

The MK200 and MK700 series of resistors are the RoHS equivalent versions of the older non-RoHS MK100 and MK600 series. These resistors have pure matte Tin (Sn) lead finish optimised for use in commercial and industrial applications.

With their compact design, it is easier to achieve greater packaging densities without the need for leaving extra space where resistor value changes can require larger resistors or non-uniform lead spacing.

The below table gives the specifications available for the complete MK200 resistor series including the MK232:

Caddock MK200 Specifications

£0.00