Ohmcraft

Ohmcraft

High Performance, High Voltage and High Ohmic Thick Film Resistors

  • NEW Ohmcraft's UHVC chip resistors which offers the highest voltage ratings available in the world
  • SMD and through-hole, high voltage, high ohmic resistor packages available with various size options
  • Utilises Micropenning® to offer the most precise and stable resistors in the industry
  • Custom resistors, networks and dividers available as well as dedicated military graded parts (MCH Series)

For their official website, please click here

Show:
Sort By:

Ohmcraft HVC0402 Series

The HVC0402 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 150V, power rating of 0.04W and a resistance range from 10kΩ up to 1GΩ all in a 0402 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0402 resistors series offers very low noise, ultra-high stability with tolerances down to ±1% (between 10kΩ and 500MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 1GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0402 chip size
  • Tolerances as low as ±1% (between 10kΩ and 500MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 100MΩ)
  • Maximum voltage rating of 150V
  • Maximum power rating of 0.04W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0402 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0402 series:

Ohmcraft HVC0402 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC0603 Series

The HVC0603 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 400V, power rating of 0.06W and a resistance range from 10kΩ up to 50GΩ all in a 0603 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0603 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0603 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 400V
  • Maximum power rating of 0.06W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0603 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0603 series:

Ohmcraft HVC0603 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC0805 Series

The HVC0805 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 600V, power rating of 0.2W and a resistance range from 10kΩ up to 50GΩ all in a 0805 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0805 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0805 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 600V
  • Maximum power rating of 0.2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0805 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0805 series:

Ohmcraft HVC0805 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC1206 Series

The HVC1206 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 1.5kV, power rating of 0.33W and a resistance range from 10kΩ up to 50GΩ all in a 1206 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC1206 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 10MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 1206 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 10MΩ)
  • Maximum voltage rating of 1.5kV
  • Maximum power rating of 0.33W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC1206 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC1206 series:

Ohmcraft HVC1206 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC2010 Series

The HVC2010 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 2kV, power rating of 1W and a resistance range from 10kΩ up to 50GΩ all in a 2010 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC2010 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 10MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2010 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 10MΩ)
  • Maximum voltage rating of 2kV
  • Maximum power rating of 1W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC2010 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC2010 series:

Ohmcraft HVC2010 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC2512 Series

The HVC2512 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 2512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC2512 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 3kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC2512 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC2512 series:

Ohmcraft HVC2512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC3512 Series

The HVC3512 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3.5kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 3512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC3512 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 3512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 3.5kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC3512 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC3512 series:

Ohmcraft HVC3512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC4020 Series

The HVC4020 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 4kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 4020 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC4020 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 4020 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 4kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC4020 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC4020 series:

Ohmcraft HVC4020 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft HVC5020 Series

The HVC5020 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 5kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 5020 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC5020 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 5020 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 5kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC5020 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC5020 series:

Ohmcraft HVC5020 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft MCH0402 Series

The MCH0402 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 150V, power rating of 0.04W and a resistance range from 10kΩ up to 1GΩ all in a 0402 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH0402 resistors offer very low noise, ultra-high stability with tolerances down to ±1% (between 10kΩ and 500MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 100MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 1GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0402 chip size
  • Tolerances as low as ±1% (between 10kΩ and 500MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 100MΩ)
  • Maximum voltage rating of 150V
  • Maximum power rating of 0.04W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH0402 ultra-high voltage surface-mount resistors are available with various terminations:

  • Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (T - RoHS Compliant)
  • Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (B - Not RoHS Compliant)
  • Solderable single surface Tin (Sn99.9) on Nickel barrier (Z - RoHS Compliant)
  • Solderable single surface Tin Lead (Sn63Pb37) flip-chip (S - Not RoHS Compliant)
  • Wire-bondable Gold (Au) (G - RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH0402 series:

Ohmcraft MCH0402 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft MCH0603 Series

The MCH0603 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 400V, power rating of 0.06W and a resistance range from 10kΩ up to 50GΩ all in a 0603 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH0603 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0603 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from -55°C up to +125°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 400V
  • Maximum power rating of 0.06W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH0603 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH0603 series:

Ohmcraft MCH0603 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft MCH0805 Series

The MCH0805 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 600V, power rating of 0.2W and a resistance range from 10kΩ up to 50GΩ all in a 0805 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH0805 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0805 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from -55°C up to +125°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 600V
  • Maximum power rating of 0.2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH0805 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH0805 series:

Ohmcraft MCH0805 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft MCH1206 Series

The MCH1206 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 1.5kV, power rating of 0.33W and a resistance range from 10kΩ up to 50GΩ all in a 1206 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH1206 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 1206 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 1.5kV
  • Maximum power rating of 0.33W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH1206 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH1206 series:

Ohmcraft MCH1206 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft MCH2010 Series

The MCH2010 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 2kV, power rating of 1W and a resistance range from 10kΩ up to 50GΩ all in a 2010 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH2010 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2010 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 2kV
  • Maximum power rating of 1W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH2010 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH2010 series:

Ohmcraft MCH2010 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00

Ohmcraft MCH2512 Series

The MCH2512 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 2512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH2512 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 500MΩ)
  • Maximum voltage rating of 3kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH2512 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH2512 series:

Ohmcraft MCH2512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00