-
Your shopping cart is empty!
Ultra Precision Bulk Metal® Foil Resistors |
|
For their official website, please click here |
The CLA ultra-precision thermosensitive resistor series from Alpha Electronics offers a highly accurate device that has a resistivity which varies linearly with temperature change in a through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce these resistors that are ideally designed for temperature detection, providing a small size and rapid response.
These Alpha CLA ultra-precision thermosensitive resistors are made of material only a few µm thick and respond rapidly to temperature changes. Strict control of foil composition maintains uniform quality without fluctuation of temperature characteristics of resistance. They are produced by the same fine photo-etching technology used in other metal foil precision resistors from Alpha.
The CLA series has a pin pitch of 2.54 ±0.25mm.
Typical applications for the CLA ultra-precision thermosensitive resistor series include:
The below table gives the full specifications for each resistor model available including the Alpha CLA series:
* Symbols parenthesized are for part number composition
£0.00
The CLB ultra-precision thermosensitive resistor series from Alpha Electronics offers a highly accurate device that has a resistivity which varies linearly with temperature change in a through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce these resistors that are ideally designed for temperature detection, providing a small size and rapid response.
These Alpha CLB ultra-precision thermosensitive resistors are made of material only a few µm thick and respond rapidly to temperature changes. Strict control of foil composition maintains uniform quality without fluctuation of temperature characteristics of resistance. They are produced by the same fine photo-etching technology used in other metal foil precision resistors from Alpha.
The CLB series has a pin pitch of 2.54 ±0.25mm.
Typical applications for the CLB ultra-precision thermosensitive resistor series include:
The below table gives the full specifications for each resistor model available including the Alpha CLB series:
* Symbols parenthesized are for part number composition
£0.00
The FLA conformally coated resistor series from Alpha Electronics offers a very precise resistor with a resistance range from 10Ω up to 100kΩ all in a small through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
The Alpha Electronics FLA precision resistor series have been designed with terminals that are easy for insertion into the PCB.
The FLB series has a pin pitch of 2.54 ±0.25mm.
Alpha's Bulk Metal® foil resistor technology means that these conformally coated, through-hole, precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
The below table gives the full specifications for each resistor model available including the Alpha FLA series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring at the point 2.5 ±1.0mm below the shoulder of the leads
£0.00
The FLB conformally coated resistor series from Alpha Electronics offers a very precise resistor with a resistance range from 10Ω up to 150kΩ all in a small through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
The Alpha Electronics FLB precision resistor series have been designed with terminals that are easy for insertion into the PCB.
The FLB series has a pin pitch of 2.54 ±0.25mm.
Alpha's Bulk Metal® foil resistor technology means that these conformally coated, through-hole, precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
The below table gives the full specifications for each resistor model available including the Alpha FLB series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring at the point 2.5 ±1.0mm below the shoulder of the leads
£0.00
The FLC conformally coated resistor series from Alpha Electronics offers a very precise resistor with a resistance range from 10Ω up to 200kΩ all in a small through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
The Alpha Electronics FLC precision resistor series have been designed with terminals that are easy for insertion into the PCB.
The FLC series has a pin pitch of 5.08 ±0.25mm.
Alpha's Bulk Metal® foil resistor technology means that these conformally coated, through-hole, precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
The below table gives the full specifications for each resistor model available including the Alpha FLC series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring at the point 2.5 ±1.0mm below the shoulder of the leads
£0.00
The KLC ultra-precision thermosensitive resistor series from Alpha Electronics offers a highly accurate device that has a resistivity which varies linearly with temperature change in a through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce these resistors that are ideally designed for temperature detection, providing a small size and rapid response. The temperature characteristics for the KLC series can be freely adjusted, please see the datasheet under the Technical Library tab or the TCR against resistance values available graph below for further details.
These Alpha KLC ultra-precision thermosensitive resistors are made of material only a few µm thick and responds rapidly to temperature changes. Strict control of foil composition maintains uniform quality without fluctuation of temperature characteristics of resistance. They are produced by the same fine photo-etching technology used in other metal foil precision resistors from Alpha.
The KLC series has a pin pitch of 7.62 ±0.25mm.
Typical applications for the KLC ultra-precision thermosensitive resistor series include:
The below graph represents possible TCR values against resistance values available for the KLC thermosensitive resistor series. Please see the datasheet under the Technical Library tab for the full specifications for the KLC series.
Graph showing possible TCR options against resistance values available in the KLC series.
£0.00
The MA ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 1Ω up to 200kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 3.81 ±0.25mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.
The below table gives the full specifications for each resistor model available including the Alpha MA series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C
£0.00
The MB ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 5Ω up to 400kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 7.5 ±0.5mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.
The below table gives the full specifications for each resistor model available including the Alpha MB series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C
£0.00
The MC ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 1Ω up to 200kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 5.08 ±0.25mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.
The below table gives the full specifications for each resistor model available including the Alpha MC series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C
£0.00
The MD ultra-precision transfer moulded resistor series from Alpha Electronics offers a wide resistance range from 5Ω up to 80kΩ with tight tolerances, all in a small through-hole package with a pin pitch of 5.08 ±0.25mm. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability.
Alpha's Bulk Metal® foil resistor technology means that these transfer moulded, through-hole, ultra-precision resistors are ideal for precision measurements, also their low inductance makes them ideal for use at higher frequencies.
These resistors are constructed using an outer coating of transfer moulded epoxy resin, making the parts strongly resistant to heat, moisture and solvents. Internally, there are secondary leads which act as a buffer so that stress on the exterior leads is not transmitted to the foil, providing stability against vibrations when the resistor is mounted on a circuit.
The below table gives the full specifications for each resistor model available including the Alpha MD series:
* Symbols parenthesized are for part number composition
✝ Resistance figures are the values obtained by measuring the leads at point 12.7±3.2mm away from the base for type MB, MC and MD, but, in case of resistance below 10Ω, the value at 1.6 ±0.6mm away from the base for all types
** Temperature characteristic Z is applicable for temperature range between 0°C and +60°C
£0.00
The MP ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 30kΩ with tight tolerances down to +0.05% (100Ω to 30kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. The Alpha MP series J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.
Alpha's MP surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.
These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.
The below table gives the full specifications for each resistor model available including the Alpha MP series:
* Please contact us for tighter tolerances
£0.00
The MPH ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 30kΩ with tight tolerances down to +0.05% (100Ω to 30kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. Expanding on the standard Alpha MP series, the MPH series offers gold-plated J-lead terminals making them suitable for higher temperatures of up to +200°C. The gold-plated J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.
Alpha's MPH surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.
These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.
The below table gives the full specifications for each resistor model available including the Alpha MPH series:
* Please contact us for tighter tolerances
£0.00
The MQ ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 60kΩ with tight tolerances down to +0.05% (100Ω to 60kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. The Alpha MQ series J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.
Alpha's MQ surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.
These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.
The below table gives the full specifications for each resistor model available including the Alpha MQ series:
* Please contact us for tighter tolerances
£0.00
The MQH ultra-precision resistor series from Alpha Electronics offers a wide resistance range from 30Ω up to 60kΩ with tight tolerances down to +0.05% (100Ω to 60kΩ), all in a small surface-mount package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce resistors with low temperature coefficients and excellent long-term stability. Expanding on the standard Alpha MQ series, the MQH series offers gold-plated J-lead terminals making them suitable for higher temperatures of up to +200°C. The gold-plated J-lead terminals provide flexibility compared to standard fixed surface-mount resistors as the resistive element internally is mechanically isolated from the leads via gold wire-bonding.
Alpha's MQH surface-mount, ultra-precision resistor series exhibit excellent high frequency characteristics thanks to their Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.
These resistors are constructed using an outer coating of epoxy resin, which provides excellent resistance to moisture, heat and solvents. Internally, the resistive element is mechanically isolated from the lead frames using gold wire-bonding.
The below table gives the full specifications for each resistor model available including the Alpha MQH series:
* Please contact us for tighter tolerances
£0.00
The NLA ultra-precision thermosensitive resistor series from Alpha Electronics offers a highly accurate device that has a resistivity which varies linearly with temperature change in a through-hole package. By utilising Alpha's Bulk Metal® foil resistor technology, they are able to produce these resistors that are ideally designed for temperature detection, providing a small size and rapid response.
These Alpha NLA ultra-precision thermosensitive resistors are made of material only a few µm thick and respond rapidly to temperature changes. Strict control of foil composition maintains uniform quality without fluctuation of temperature characteristics of resistance. They are produced by the same fine photo-etching technology used in other metal foil precision resistors from Alpha.
The NLA series has a pin pitch of 2.54 ±0.25mm.
Typical applications for the NLA ultra-precision thermosensitive resistor series include:
The below table gives the full specifications for each resistor model available including the Alpha NLA series:
* Symbols parenthesized are for part number composition
£0.00