Capacitors

Capacitors

We have a wide variety of high quality ceramic disc and multi layer capacitors. The range of capacitors include high temperature, high voltage, non-magnetic, surface-mount and through hole technology. They are available in a number of different capacitance values, sizes, voltage ratings and TCR. These capacitors are considered ideal for harsh environments, high temperature and safety critical applications.


If you require any further information or you require something different to the standard product, please do not hesitate to contact us.


Show:
Sort By:

SRT Microcéramique Chip Capacitors with Negative TC

  • Ceramic chip MLCC capacitors with negative temperature coefficient (TC)
  • Temperature coefficients of N150, N220, N330 and N470 at ±60ppm, N750 and N1200 at ±120ppm
  • Available in capacitance ratings between 0.47pF and 8.2nF
  • Available in standard chip sizes from 0603 to 1210
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Selection of Voltage ratings: 50V or 100V
  • Selection of tolerances: ±0.1pF, ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10% and ±20%
  • Operating temperature between -55°C and +125°C

The NP0 (C0G) ceramic chip MLCC capacitor series with negative TC from SRT Microcéramique offers a wide range of options to suit any demand, including a selection of negative temperature coefficients (N150±60ppm, N220±60ppm, N330±60ppm, N470±60ppm, N750±120ppm, N1200±120ppm), as well as capacitance between 0.47pF to 8.2nF across a range of chip sized from 0603 to 1210, wide selection of tolerances (±0.1pF, ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10% and ±20%), voltages (50V or 100V) and a range of terminations. As with all SRT-MC components, the NP0 capacitors are popular in safety-critical industries thanks to their excellent quality and reliability, as well as zero aging rate up to 10000 hours, zero voltage coefficient of capacitance and change of capacitance with frequency, and very low temperature coefficient of capacitance. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The dielectric strength test for the NP0 capacitors with negative TC is performed per method 103 or EIA 198-2-E with 250% of the rated voltage applied.

Typical applications for the SRT-MC NP0 series of ceramic capacitors with negative TC include:

  • Temperature compensation applications
  • Oscillators

The below table gives the specifications overview for each capacitor model available within the NP0 series with the negative TC:

SRT Microcéramique NP0 series (Negative TC)

£0.00

SRT Microcéramique High Capacitance NP0 Capacitor Stack Series

  • Ceramic chip 50V Capacitor stacks
  • Available in 1210 size in three variants – J, L and D
  • Available in capacitance ratings 330nF (3 lead model), 470nF (5 lead model) or 1µF (10 lead model)
  • Dissipation factor of 10.10-4 max
  • Temperature Coefficient of 30ppm
  • Selection of tolerances: ±1%, ±2% and ±5%
  • Operating temperature between -55°C and +125°C

The NP0 "Turbocap" capacitor stack offers high stability and high capacitance value of 330nF (3 lead model), 470nF (5 lead model) or 1µF (10 lead model) at 50V, ideal for switch mode power supply applications. These capacitor stacks are available in three variants – D, J and L and offer selection of tolerances ±1%, ±2% or ±5% . As with all SRT-MC components, the NP0 capacitor stacks are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

While this capacitor series offers a number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The below table gives the specifications overview for each capacitor model available within the NP0 capacitor stack series:

SRT Microcéramique Turbocap NP0 Capacitor Stacks

£0.00

SRT Microcéramique High Capacitance X7R Capacitor Stack Series

  • Ceramic chip 50V and 100V Capacitor stacks
  • Available in variants D, J and L with 3, 5 or 10 leads.
  • Capacitance ratings between 6.8µF and 92µF
  • Dissipation factor of 2.5% maximum at 1Vrms, 1kHz, 25°C
  • Temperature Coefficient of ±15% with 0Vdc applied
  • Tolerance of ±20%
  • Operating temperature between -55°C and +125°C

The X7R “Turbocap” capacitor stack offers high capacitance for switch mode power supply applications in a low profile package. Capacitance values between 6.8µF and 92µF are available across 3-, 5- and 10-lead models, with voltage options of 50V and 100V, and ±20% tolerance. These capacitor stacks are available in variants D, J and L (see the schematic in the images). As with all SRT-MC components, the X7R capacitor stacks are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

While this capacitor series offers a number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The below table gives the specifications overview for each capacitor model available within the X7R capacitor stack series:

SRT Microcéramique Turbocap X7R Capacitor Stacks

£0.00

SRT Microcéramique High Frequency Capacitor Series

  • High frequency ceramic chip MLCC capacitors
  • Available in capacitance ratings between 0.47pF and 1nF
  • Available in standard chip sizes from 0402 to 1210
  • Dissipation factor of ≤ 5.10-4 at 1Vrms and 1MHz (≤ 1000pF) or 1KHz  (> 1000pF)
  • Temperature coefficient of ±30ppm
  • Selection of Voltage ratings: 50V, 100V, 200V and 500V
  • Selection of tolerances: ±0.05pF, ±0.1pF, ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%
  • Operating temperature between -55°C and +125°C

The high frequency ceramic chip MLCC capacitor series from SRT Microcéramique offers a wide range of options to suit any demand, including capacitance between 0.47pF to1nF across a range of chip sizes from 0402 to 1210, selection of tolerances (±0.05pF, ±0.1pF, ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%), voltage options (50V, 100V, 200V and 500V) and a range of terminations. As with all SRT-MC components, the SRT-MC high frequency capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of standard options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

Typical applications for the SRT-MC High frequency series of ceramic capacitors include:

  • RF and microwave communication (100MHz – 5GHz)
  • Satellite communication
  • Base station applications
  • Wireless devices
  • Radar applications

The below table gives the specifications overview for each capacitor model available within the High Frequency series:

SRT Microcéramique High Frequency Capacitor series

£0.00

SRT Microcéramique High Power Low Frequency Capacitor Series

  • High power low frequency ceramic chip MLCC capacitors
  • Available in capacitance ratings between 82pF and 1.8µF
  • Available in standard chip sizes from 1812 to 6660
  • Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
  • Temperature coefficient of -2220 ±350ppm/°C
  • Wide selection of Voltage ratings: 200V, 500V, 630V, 750V, 1kV, 1.5kV, 2kV, 3kV, 4kV and 5kV
  • Selection of tolerances: ±2%, ±5%, ±10% or ±20%
  • Operating temperature between -55°C and +125°C

The high power low frequency ceramic chip MLCC capacitor series from SRT Microcéramique offers low capacitance variation with voltage. It features a wide range of options to suit any demand, including capacitance between 82pF to 1.8µF across a range of chip sizes from 1812 to 6660, selection of tolerances (±2%, ±5%, ±10% and ±20%), voltage options between 200V and 5000V and a range of terminations. As with all SRT-MC components, the SRT-MC power capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of standard options, customisation is possible on all SRT Microcéramique components – if none of the options is suitable for your application, please Contact us to discuss the custom solutions available.

The below table gives the specifications overview for each capacitor model available within the High Power Low Frequency series:

SRT Microcéramique High Frequency Capacitor series

£0.00

SRT Microcéramique High Temperature NP0 Capacitor Series

  • High Temperature, low voltage, ultra-stable ceramic chip MLCC capacitors
  • Available in capacitance ratings between 0.47pF and 300nF
  • Available in standard chip sizes from 0402 to 2225
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Temperature coefficient of ±30ppm
  • Selection of Voltage ratings: 16V, 25V, 50V or 100V
  • Selection of tolerances: ±0.25pF, ±0.5pF, ±0.05%, ±0.1%, ±0.5%, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%
  • Operating temperature between -55°C and +215°C

The High Temperature NP0 (Type D03) low voltage, ultra stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 0.47pF to 300nF across a range of chip sizes from 0402 to 2225, wide selection of tolerances (±0.25pF, ±0.5pF, ±0.05%, ±0.1%, ±0.5%, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (16V, 25V, 50V or 100V) and a wide range of terminations. As with all SRT-MC components, the NP0 capacitors are popular in safety-critical industries thanks to their excellent quality and reliability, as well as zero aging rate up to 10000 hours, zero voltage coefficient of capacitance and change of capacitance with frequency, and very low temperature coefficient of capacitance. The high temperature NP0 models have operating temperature is between -55°C and +215°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

Typical applications for the High Temperature SRT-MC NP0 series of ceramic capacitors include:

  • Passing
  • Coupling
  • Filtering
  • Blocking
  • Applications where high stability of dielectric characteristics is required

The below table gives the specifications overview for each capacitor model available within the High Temperature NP0 series:

SRT Microcéramique High Temperature NP0 Capacitor series

£0.00

SRT Microcéramique High Temperature X7R Capacitor Series

  • High temperature, low voltage ceramic chip MLCC capacitors
  • Available in capacitance ratings between 1nF and 1.5µF
  • Available in standard chip sizes from 0402 to 1812
  • Dissipation factor under 0.025
  • Temperature coefficient of ±15%, with 0Vdc applied
  • Selection of voltage ratings: 25V, 50V or 100V
  • Selection of tolerances: ±5%, ±10% and ±20%
  • Operating temperature between -55°C and +225°C
  • Palladium-Silver terminations

The high temperature X7R low voltage, stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a wide range of options to suit any demand, including capacitance between 1nF to 1.5µF across a range of chip sizes from 0402 to 1812, a selection of tolerances (±5%, ±10% or ±20%) and voltages (25V, 50V or 100V). These high-temperature capacitors are supplied with palladium-silver terminations as standard. As with all SRT-MC components, the X7R capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. The operating temperature of the high-temperature X7R models is between -55°C and +225°C.

While this capacitor series offers a number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The below table gives the specifications overview for each capacitor model available within the X7R HT series (25V-100V):

SRT Microcéramique High Temperature X7R Capacitor series

£0.00

SRT Microcéramique High Voltage NP0 Capacitor Series (200V-1kV)

  • High voltage, ultra-stable ceramic, chip MLCC capacitors
  • Available in capacitance ratings between 0.47pF and 100nF
  • Available in standard chip sizes from 0603 to 3640
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Temperature coefficient of ±30ppm
  • Selection of Voltage ratings: 200V, 500V or 1kV
  • Selection of tolerances: ±0.25pF, ±0.5pF, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%
  • Operating temperature between -55°C and +125°C

The NP0 (Type 1) high voltage, ultra-stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 0.47pF to 100nF across a range of chip sizes from 0603 to 3640, selection of tolerances (±0.25pF, ±0.5pF, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (200V, 500V and 1000V) and a wide range of terminations. As with all SRT-MC components, the NP0 capacitors are popular in safety-critical industries thanks to their excellent quality and reliability, as well as zero aging rate up to 10000 hours, zero voltage coefficient of capacitance and change of capacitance with frequency, and very low temperature coefficient of capacitance. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The dielectric strength test for the NP0 capacitors is performed per method 103 or EIA 198-2-E. For the 200Vdc models, 250% of rated voltage is applied; for the 500Vdc model it is a minimum of 200% of the rated voltage and for the 1000Vdc models the applied voltage is minimum 150% of the rated voltage.

Typical applications for the SRT-MC NP0 series of high voltage ceramic capacitors include:

  • Surge suppression
  • High voltage applications
  • Low dissipation applications

The below table gives the specifications overview for each capacitor model available within the NP0 series between 200V and 1000V:

SRT Microcéramique High Voltage NP0 series (200V to 1000V)

£0.00

SRT Microcéramique High Voltage NP0 Capacitor Series (2kV-10kV)

  • High voltage, ultra-stable ceramic, chip MLCC capacitors
  • Available in capacitance ratings between 0.47pF and 47nF
  • Available in standard chip sizes from 1206 to 8060
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Temperature coefficient of ±30ppm
  • Selection of Voltage ratings: 2kV, 3kV, 4kV, 5kV and 10kV
  • Selection of tolerances: ±0.25pF, ±0.5pF, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%
  • Operating temperature between -55°C and +125°C

The NP0 (Type 1) high voltage, ultra-stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 0.47pF to 47nF across a range of chip sizes from 1206 to 8060, selection of tolerances (±0.25pF, ±0.5pF, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (2kV, 3kV, 4kV, 5kV and 10kV) and a wide range of terminations. As with all SRT-MC components, the NP0 capacitors are popular in safety-critical industries thanks to their excellent quality and reliability, as well as zero aging rate up to 10000 hours, zero voltage coefficient of capacitance and change of capacitance with frequency, and very low temperature coefficient of capacitance. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The dielectric strength test for the NP0 capacitors is performed per method 103 of EIA 198-2-E

Typical applications for the SRT-MC NP0 series of high voltage ceramic capacitors include:

  • Passing
  • Coupling
  • Filtering
  • Blocking
  • Applications where high stability of dielectric characteristics is required

The below table gives the specifications overview for each capacitor model available within the NP0 high voltage series between 2kV and 10kV:

SRT Microcéramique High Voltage NP0 capacitor series (2kV to 10kV)

£0.00

SRT Microcéramique High Voltage X7R Capacitor Series (200V-1kV)

  • High voltage, ceramic, chip MLCC capacitors
  • Available in capacitance ratings between 100pF and 1.5µF
  • Available in standard chip sizes from 0603 to 5440
  • Dissipation factor under 0.025 at 1kHz for C ≥ 1nF and under 0.025 at 1MHz for C ≤ 1nF
  • Temperature coefficient of ±30ppm
  • Voltage ratings of 200V, 250V, 500V, 630V or 1000V
  • Selection of tolerances: ±5%, ±10%, ±20% or -20% to +80%
  • Operating temperature between -55°C and +125°C

The X7R (Type 2) high voltage, stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 100pF to 1.5µF across a range of chip sizes from 0603 to 5440, selection of tolerances (±5%, ±10%, ±20% or -20% to +80%), voltages (200, 250, 500, 630 or 1000V) and a wide range of terminations. As with all SRT-MC components, the X7R capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The dielectric strength test for the X7R capacitors is performed per method 103 or EIA 198-2-E. For the 250Vdc models, 250% of rated voltage is applied; for the 500Vdc model it is a minimum of 150% of the rated voltage and for the 630Vdc and 1000Vdc models the applied voltage is minimum of 120% of the rated voltage.

Typical applications for the SRT-MC X7R high voltage series of ceramic capacitors include:

  • Passing
  • Coupling
  • Filtering
  • Blocking

The below table gives the specifications overview for each capacitor model available within the X7R high voltage series between 200V and 1000V:

SRT Microcéramique X7R series (200V to 1000V)

£0.00

SRT Microcéramique High Voltage X7R Capacitor Series (2kV-10kV)

  • High voltage, ceramic, chip MLCC capacitor
  • Available in capacitance ratings between 10pF and 470nF
  • Available in standard chip sizes from 1206 to 8060
  • Dissipation factor under 0.025 at 1kHz for C ≥ 1nF and under 0.025 at 1MHz for C ≤ 1nF
  • Temperature coefficient of ±30ppm
  • Selection of voltage ratings: 2kV, 3kV, 4kV, 5kV and 10kV
  • Selection of tolerances: ±5%, ±10% and ±20%
  • Operating temperature between -55°C and +125°C

The X7R (Type 2) high voltage, stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 10pF to 470nF across a range of chip sizes from 1206 to 8060, selection of tolerances (±5%, ±10% or ±20%), voltages (2kV, 3kV, 4kV, 5kV and 10kV) and a wide range of terminations. As with all SRT-MC components, the X7R capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The dielectric strength test for the X7R capacitors is performed per method 103 or EIA 198-2-E, applying 1.2Un for 5s with 50mA maximum charging current.

Typical applications for the SRT-MC X7R series of high voltage ceramic capacitors include:

  • Passing
  • Coupling
  • Filtering
  • Blocking

The below table gives the specifications overview for each capacitor model available within the X7R series between 2kV and 10kV:

SRT Microcéramique X7R series (2kV to 10kV)

£0.00

SRT Microcéramique Low Inductance Capacitor Series

  • Low inductance ceramic chip MLCC capacitors
  • Available in capacitance ratings between 1nF and 470nF
  • Available in standard chip sizes from 0204 to 0612
  • Dissipation factor under 2.5% at 1kHz
  • Temperature Coefficient of ±15% with 0Vdc applied
  • Selection of Voltage ratings: 6.3V, 10V, 16V, 25V and 50V
  • Selection of tolerances: ±10% and ±20%
  • Operating temperature between -55°C and +125°C

The Low Inductance ceramic chip MLCC capacitor series from SRT Microcéramique offers a high-speed energy transfer for semiconductor applications. This series features a wide range of options to suit any demand, including capacitance between 1nF to 470nF across a range of chip sizes from 0204 to 0612, a selection of ±10% or ±20% tolerance, voltage options (6.3V, 10V, 16V, 25V and 50V) and a selection of termination options. As with all SRT-MC components, the X7R capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While this capacitor series offers a number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The below table gives the specifications overview for each capacitor model available within the Low Inductance series:

SRT Microcéramique Low Capacitance Capacitor series

£0.00

SRT Microcéramique Low Voltage BX Capacitor Series (50-100V)

  • Low voltage ceramic chip MLCC capacitors
  • Available in capacitance ratings between 100pF and 1µF
  • Available in standard chip sizes from 0805 to 2225
  • Dissipation factor under 0.025 at 1kHz for C ≥ 1nF and under 0.025 at 1MHz for C ≤ 1nF
  • Selection of Voltage ratings: 50V or 100V
  • Selection of tolerances: ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10%, ±20% and -20% to +80%
  • Operating temperature between -55°C and +125°C

The BX low voltage, stable ceramic chip MLCC capacitor series from SRT Microcéramique offers improved voltage behaviour compared to the X7R series. These capacitors feature a wide range of options to suit any demand, including capacitance between 100pF to 1µF across a range of chip sizes from 0805 to 2225, wide selection of tolerances (±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (50V or 100V) and a range of terminations. As with all SRT-MC components, the BX capacitors are popular in safety-critical industries thanks to their excellent quality and reliability and are manufactured according to MIL Specifications. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While the BX series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

Typical applications for the SRT-MC BX series of low voltage ceramic capacitors include:

  • Passing
  • Coupling
  • Filtering
  • Blocking

The below table gives the specifications overview for each low voltage capacitor model available within the BX-series (50V-100V):

SRT Microcéramique Low Voltage X7R series

£0.00

SRT Microcéramique Low Voltage NP0 Capacitor Series (16-100V)

  • Low voltage, ultra-stable ceramic, chip MLCC capacitors
  • Available in capacitance ratings between 0.47pF and 100nF
  • Available in standard chip sizes from 0402 to 0603
  • Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
  • Temperature coefficient ±30ppm
  • Selection of Voltage ratings: 16V, 25V, 50V or 100V
  • Selection of tolerances: ±0.25pF, ±0.5pF, ±0.05%, ±0.1%, ±0.5%, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%
  • Operating temperature between -55°C and +125°C

The NP0 (Type 1) low voltage, ultra-stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a vast range of options to suit any demand, including capacitance between 0.47pF to 100nF across a range of chip sizes from 0402 to 2225, wide selection of tolerances (±0.25pF, ±0.5pF, ±0.05%, ±0.1%, ±0.5%, ±1%. ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (16V, 25V, 50V or 100V) and a wide range of terminations. As with all SRT-MC components, the NP0 capacitors are popular in safety-critical industries thanks to their excellent quality and reliability, as well as zero aging rate up to 10000 hours, zero voltage coefficient of capacitance and change of capacitance with frequency, and very low temperature coefficient of capacitance. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While the NP0 series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

Typical applications for the SRT-MC NP0 series of ceramic capacitors include:

  • Timing and tuning circuits
  • High frequency filtering

The below table gives the specifications overview for each low-voltage capacitor model available within the NP0 series between 16V and 100V:

SRT Microcéramique Low Voltage NP0 series

£0.00

SRT Microcéramique Low Voltage X7R Capacitor Series (16-100V)

  • Low voltage ceramic chip MLCC capacitor
  • Available in capacitance ratings between 100pF and 8.2µF
  • Available in standard chip sizes from 0402 to 2225
  • Dissipation factor under 0.025 at 1kHz for C ≥ 1nF and under 0.025 at 1MHz for C ≤ 1nF
  • Selection of Voltage ratings: 16V, 25V, 50V or 100V
  • Selection of tolerances: ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10%, ±20% and -20% to +80%
  • Operating temperature between -55°C and +125°C

The X7R low voltage, stable ceramic chip MLCC capacitor series from SRT Microcéramique offers a wide range of options to suit any demand, including capacitance between 100pF to 8.2µF across a range of chip sizes from 0402 to 2225, wide selection of tolerances (±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10%, ±20% and -20% to +80%), voltages (16V, 25V, 50V or 100V) and a range of terminations. As with all SRT-MC components, the X7R capacitors are popular in safety-critical industries thanks to their excellent quality and reliability. Their operating temperature is between -55°C and +125°C.

Termination options available include:

  • Palladium-Silver
  • Gold-plated Silver
  • Tin-plated Nickel
  • Tin-plated Copper
  • Flexible Tin-plated polymer (Microflex), improving the resistance to brittle fracture if the board is subject to flexion or vibration

While the X7R series offers a large number of options, customisation is possible on all SRT Microcéramique components – if none of the options are suitable for your application, please Contact us to discuss the custom solutions available.

The dielectric strength test for the low voltage X7R capacitors is performed per method 103 or EIA 198-2-E with 250% of the rated voltage applied.

Typical applications for the SRT-MC X7R series of low voltage ceramic capacitors include:

  • Passing
  • Coupling
  • Filtering
  • Blocking

The below table gives the specifications overview for each low voltage capacitor model available within the X7R series (16V-100V):

SRT Microcéramique Low Voltage X7R series

£0.00