Cynergy3

Cynergy3

Liquid Level, Flow and Temperature Sensors, Pressure Transducers, High Voltage Relays and Signal Conditioners

  • Wide selection of sensors, relays and other components serving a range of industries
  • Development of solutions for customer-specific applications
  • Customised options available
  • ATEX, UL, WRAS and PED-approved components available

For their official website, please click here

Show:
Sort By:

Cynergy3 D1 Form C (changeover) Relay Series

The D1 series of reed relays with changeover contacts offers 100W switching power (at 33.3V DC switching voltage), an isolation across contacts of 0.75kV (AC or DC peak) and highly reliable tungsten contacts. These relays utilise high vacuum reed switches to achieve their excellent switching characteristics, and are often used in safety critical applications. The D1 series of relays is offered with or without magnetic screen and is PCB mountable, with custom mounting options available upon request. The series has been UL approved as per pollution degree 2 classification. The D1 series offers a working temperature range from -40°C up to +65°C.

  • UL approved, D Size Form C (Changeover) relays
  • 100W switching power
  • Tungsten changeover contacts
  • Isolation across contacts 0.75kV (AC or DC peak)
  • Maximum switching voltage of 240V DC
  • Choice of three coil voltage ratings - 5V, 12V or 24V DC
  • PCB mount (custom mounting options available upon request)
  • Available with or without magnetic screen
  • Working temperature from -40°C up to +65°C

Typical applications for the Cynergy3 D1 changeover relay series include:

  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 D1 series:

Cynergy3 D1 series specifications

£0.00

Cynergy3 DA (UL) 10kV Normally Open Relay Series

The DA (UL) series of normally open, high voltage relays offers an isolation voltage of 10kV with contact resistance as low as 15mΩ (typical for Rhodium contacts). These relays utilise high vacuum reed switches to achieve their excellent characteristics, and are available in choice of Rhodium or Tungsten contacts - the Rhodium contacts offer lower contact resistance, while the Tungsten handles higher switching voltages. The DA (UL) series of relays is offered as PCB and panel mountable with variety of connection options. The series has been UL approved as per pollution degree 2 classification. The DA (UL) series offers a working temperature range from -20°C up to +70°C.

  • UL approved, normally open, high voltage relays
  • 10kV isolation voltage
  • Contact resistance typically 15mΩ with Rhodium contacts (50mΩ maximum)
  • Maximum switching voltage as high as 7kV with Tungsten contacts
  • Excellent AC characteristics
  • PCB or panel mount versions available
  • Choice of HV connection includes flying leads, solder turret (wire wrap) or 1/4" spade terminals
  • Working temperature from -20°C up to +70°C

Typical applications for the Cynergy3 DA (UL) N/O high voltage relay series include:

  • Medical - cardiac defibrilators
  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 DA (UL) series:

Cynergy3 DA (UL) series specifications

£0.00

Cynergy3 DA (UL) 5kV Normally Open Relay Series

The DA (UL) series of normally open, high voltage relays offers an isolation voltage of 5kV with contact resistance as low as 15mΩ (typical for Rhodium contacts). These relays utilise high vacuum reed switches to achieve their excellent characteristics, and are available in choice of Rhodium or Tungsten contacts - the Rhodium contacts offer lower contact resistance, while the Tungsten handles higher switching voltages. The DA (UL) series of relays is offered as PCB and panel mountable with variety of connection options. The series has been UL approved as per pollution degree 2 classification. The DA (UL) series offers a working temperature range from -20°C up to +70°C.

  • UL approved, normally open, high voltage relays
  • 5kV isolation voltage
  • Contact resistance typically 15mΩ with Rhodium contacts (50mΩ maximum)
  • Maximum switching voltage as high as 3.5kV with Tungsten contacts
  • Excellent AC characteristics
  • PCB or panel mount versions available
  • Choice of HV connection includes flying leads, solder turret (wire wrap) or 1/4" spade terminals
  • Working temperature from -20°C up to +70°C

Typical applications for the Cynergy3 DA (UL) N/O high voltage relay series include:

  • Medical - cardiac defibrilators
  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 DA (UL) series:

Cynergy3 DA (UL) series specifications

£0.00

Cynergy3 DA (UL) 7.5kV Normally Open Relay Series

The DA (UL) series of normally open, high voltage relays offers an isolation voltage of 7.5kV with contact resistance as low as 15mΩ (typical for Rhodium contacts). These relays utilise high vacuum reed switches to achieve their excellent characteristics, and are available in choice of Rhodium or Tungsten contacts - the Rhodium contacts offer lower contact resistance, while the Tungsten handles higher switching voltages. The DA (UL) series of relays is offered as PCB and panel mountable with variety of connection options. The series has been UL approved as per pollution degree 2 classification. The DA (UL) series offers a working temperature range from -20°C up to +70°C.

  • UL approved, normally open, high voltage relays
  • 7.5kV isolation voltage
  • Contact resistance typically 15mΩ with Rhodium contacts (50mΩ maximum)
  • Maximum switching voltage as high as 5kV with Tungsten contacts
  • Excellent AC characteristics
  • PCB or panel mount versions available
  • Choice of HV connection includes flying leads, solder turret (wire wrap) or 1/4" spade terminals
  • Working temperature from -20°C up to +70°C

Typical applications for the Cynergy3 DA (UL) N/O high voltage relay series include:

  • Medical - cardiac defibrilators
  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 DA (UL) series:

Cynergy3 DA (UL) series specifications

£0.00

Cynergy3 DB (UL) 10kV Normally Closed Relay Series

The DB (UL) series of normally closed, high voltage relays offers an isolation voltage of 10kV with contact resistance as low as 15mΩ (typical for Rhodium contacts). These relays utilise high vacuum reed switches to achieve their excellent characteristics, and are available in choice of Rhodium or Tungsten contacts - the Rhodium contacts offer lower contact resistance, while the Tungsten handles higher switching voltages. The DB (UL) series of relays is offered as PCB and panel mountable with variety of connection options. The series has been UL approved as per pollution degree 2 classification. The DA (UL) series offers a working temperature range from -20°C up to +70°C.

  • UL approved, normally closed, high voltage relays
  • 10kV isolation voltage
  • Contact resistance typically 15mΩ with Rhodium contacts (50mΩ maximum)
  • Maximum switching voltage as high as 7kV with Tungsten contacts
  • Excellent AC characteristics
  • PCB or panel mount versions available
  • Choice of HV connection includes flying leads, solder turret (wire wrap) or 1/4" spade terminals
  • Working temperature from -20°C up to +70°C

Typical applications for the Cynergy3 DB (UL) N/C high voltage relay series include:

  • Medical - cardiac defibrilators
  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 DB (UL) series:

Cynergy3 DB (UL) series specifications

£0.00

Cynergy3 DB (UL) 5kV Normally Closed Relay Series

The DB (UL) series of normally closed, high voltage relays offers an isolation voltage of 5kV with contact resistance as low as 15mΩ (typical for Rhodium contacts). These relays utilise high vacuum reed switches to achieve their excellent characteristics, and are available in choice of Rhodium or Tungsten contacts - the Rhodium contacts offer lower contact resistance, while the Tungsten handles higher switching voltages. The DB (UL) series of relays is offered as PCB and panel mountable with variety of connection options. The series has been UL approved as per pollution degree 2 classification. The DA (UL) series offers a working temperature range from -20°C up to +70°C.

  • UL approved, normally closed, high voltage relays
  • 5kV isolation voltage
  • Contact resistance typically 15mΩ with Rhodium contacts (50mΩ maximum)
  • Maximum switching voltage as high as 3.5kV with Tungsten contacts
  • Excellent AC characteristics
  • PCB or panel mount versions available
  • Choice of HV connection includes flying leads, solder turret (wire wrap) or 1/4" spade terminals
  • Working temperature from -20°C up to +70°C

Typical applications for the Cynergy3 DB (UL) N/C high voltage relay series include:

  • Medical - cardiac defibrilators
  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 DB (UL) series:

Cynergy3 DB (UL) series specifications

£0.00

Cynergy3 DB (UL) 7.5kV Normally Closed Relay Series

The DB (UL) series of normally closed, high voltage relays offers an isolation voltage of 7.5kV with contact resistance as low as 15mΩ (typical for Rhodium contacts). These relays utilise high vacuum reed switches to achieve their excellent characteristics, and are available in choice of Rhodium or Tungsten contacts - the Rhodium contacts offer lower contact resistance, while the Tungsten handles higher switching voltages. The DB (UL) series of relays is offered as PCB and panel mountable with variety of connection options. The series has been UL approved as per pollution degree 2 classification. The DA (UL) series offers a working temperature range from -20°C up to +70°C.

  • UL approved, normally closed, high voltage relays
  • 7.5kV isolation voltage
  • Contact resistance typically 15mΩ with Rhodium contacts (50mΩ maximum)
  • Maximum switching voltage as high as 5kV with Tungsten contacts
  • Excellent AC characteristics
  • PCB or panel mount versions available
  • Choice of HV connection includes flying leads, solder turret (wire wrap) or 1/4" spade terminals
  • Working temperature from -20°C up to +70°C

Typical applications for the Cynergy3 DB (UL) N/C high voltage relay series include:

  • Medical - cardiac defibrilators
  • Test equipment
  • High voltage power supplies

The below table gives the full specifications for each resistor model available including the Cynergy3 DB (UL) series:

Cynergy3 DB (UL) series specifications

£0.00

Cynergy3 IPS Pressure Transducer Series

The IPS series of ceramic industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPS pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and outputs (4-20mA, 0-100mV or 0-5V). Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -40°C to 135°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSP male

The IPS series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPS pressure transducer series include:

  • Various industrial applications

The below table gives the full specifications for each resistor model available including the Cynergy3 IPS series:

Cynergy3 IPS series specifications

£0.00

Cynergy3 IPSAT Intrinsically Safe Pressure Transducer Series

The IPSAT series of intrinsically safe industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPSAT pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and 4-20mA output. Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable. The IPSAT series of pressure transducers is fully ATEX and IECEx approved, making is suitable for applications in hazardous areas.

  • Intrinsically safe industrial pressure transducers
  • ATEX and IECEx approved for use in Zone 2 Hazardous Areas (Ex II 1G Ex ia IIC T4 Ga (Ta - see datasheet))
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (ambient temperature) of -40°C to 75°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSPP male (customisable)

The IPSAT series of intrinsically safe pressure transducers is available in several pressure range options, with further customisation available - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPSAT pressure transducers series include:

  • Various industrial applications
  • Applications in Hazardous Areas

The below table gives the full specifications for each resistor model available including the Cynergy3 IPSAT series:

Cynergy3 IPS series specifications

£0.00

Cynergy3 ITT Programmable Temperature Probe series - 1/4" BSP

The ITT series of programmable temperature probes utilise K or J thermocouple or a PT100 RTD sensor and a 6mm stainless steel sheath for efficient temperature measurement (accuracy of 0.1% for RTD and 0.2% for thermocouple), delivered via programmable 4-20mA transmitter output. The probe comes pre-programmed for easy setup, but the can be configured to any temperature range within the probe's capability using the software provided.

  • Programmable temperature probes
  • Available with J type thermocouple (0-1200°C range), K type thermocouple (0-1350°C range) or PT100 RTD sensor (-200-850°C range)
  • 6mm stainless steel sheath available in various lengths
  • Robust aluminium head
  • Output via 4-20mA transmitter, programable to any temperature range within the probe's capabilities (software available to download from Technical Library)
  • Operating temperature range (ambient) of -20°C to 50°C
  • Accuracy of 0.1% overall for RTD and 0.2% for thermocouple
  • Process connection via 1/4" BSP male
  • Can be used with any standard 6mm compression fittings

The ITT series of pressure transducers is available with a variety of accessories such as plastic and metal cable glands, compression fittings or stainless steel pockets - speak to our technical sales team to discuss your requirement.

The below table gives the full specifications for each resistor model available including the Cynergy3 ITT series:

Cynergy3 ITT series specifications

£0.00

Cynergy3 ITTU Programmable Temperature Probe series - 1/4" NPT

The ITTU series of programmable temperature probes utilise K or J thermocouple or a PT100 RTD sensor and a 6mm stainless steel sheath for efficient temperature measurement (accuracy of 0.1% for RTD and 0.2% for thermocouple), delivered via programmable 4-20mA transmitter output. The probe comes pre-programmed for easy setup, but the can be configured to any temperature range within the probe's capability using the software provided.

  • Programmable temperature probes
  • Available with J type thermocouple (0-1200°C range), K type thermocouple (0-1350°C range) or PT100 RTD sensor (-200-850°C range)
  • 6mm stainless steel sheath available in various lengths
  • Robust aluminium head
  • Output via 4-20mA transmitter, programable to any temperature range within the probe's capabilities (software available to download from Technical Library)
  • Operating temperature range (ambient) of -20°C to 50°C
  • Accuracy of 0.1% overall for RTD and 0.2% for thermocouple
  • Process connection via 1/4" NPT
  • Can be used with any standard 6mm compression fittings

The ITTU series of pressure transducers is available with a variety of accessories such as plastic and metal cable glands, compression fittings or stainless steel pockets - speak to our technical sales team to discuss your requirement.

The below table gives the full specifications for each resistor model available including the Cynergy3 ITTU series:

Cynergy3 ITT series specifications

£0.00

Cynergy3 IWPT Wireless Pressure Transducer Series

The IWPT series of wireless industrial pressure transducers from Cynergy3 utilises piezo-resistive thick film ceramic sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.25% of the full scale (BFSL), selection of pressure ranges from -1 to +400 bar gauge and up to 750m line-of-sight range. The IWPT series' user selectable features include transmission update rates, output (1-5V or 4-20mA) and configuration (single or 5 channel; depending on receiver used). The IWPT series is designed to be paired with one of the IWR family of wireless receivers for simple plug-and-play pressure measurement solution; a swivel adaptor is available to allow easy alignment of the head with the receiver. The sensors are housed within a 316 stainless steel body, making them suitable to use with liquids and gases. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • 316 Stainless steel housing for excellent media compatibility (liquids and gases)
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -20°C to 135°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" BSP male

The IWPT series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWPT pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWPT series:

Cynergy3 IWPT series specifications

£0.00

Cynergy3 IWR-1 Wireless Receiver - 1 channel

The IWR-1 single channel wireless receiver from Cynergy3 is a designed to be paired with IWPT, IWPTU, IWTT and IWTTU series of wireless pressure and temperature sensors. With end-to-end accuracy of 0.25% FS BFSL and up to 750m line-of-sight range (with use of optional 3dBl antenna), the wireless system offers an economical alternative to traditional wired transducer solutions. While offering user-selectable features (choice of output, transmission rate etc.), this received is designed to work "out-of-the-box" as a simple plug-and-play remote measurement solution.

  • Single channel wireless receiver for IWPT/U and IWTT/U series of wireless pressure and temperature transducers
  • Simple plug-and-play installation (configuration software available to download from Technical Library if required)
  • User selectable output: 4-20mA or 1-5V
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -10°C to +50°C
  • Clean contact output for process, low battery or loss of signal alarm function
  • Up to 750m line-of-sight range when used with 3dBl antenna (up to 500m with standard 0dBl antenna)
  • Powered by 12-32Vdc supply

A range of auxilliary parts is available for the IWR-1 receiver, including DIN rail and wall mounting kits, upgraded 3dBl antenna, etc. - please speak to our technical sales team to discuss your requirements.

The below table gives the full specifications for the Cynergy3 IWR-1 wireless receiver:

Cynergy3 IWR-1 specifications

£0.00

Cynergy3 IWR-5 Wireless Receiver - 5 channel

The IWR-5 five channel wireless receiver from Cynergy3 is a designed to be paired with IWPT, IWPTU, IWTT and IWTTU series of wireless pressure and temperature sensors. With end-to-end accuracy of 0.25% FS BFSL and up to 750m line-of-sight range (with use of optional 3dBl antenna), the wireless system offers an economical alternative to traditional wired transducer solutions. The IWR-5 offers user-selectable features (choice of output, transmission rate etc.) and requires minimal setup using the software provided, ensuring a simple solution to multi-channel remote measurement applications.

  • Wireless receiver for IWPT/U and IWTT/U series of wireless pressure and temperature transducers
  • 5 channel
  • Simple installation using the IWR-Set software (download link available in Technical Library)
  • User selectable output: 4-20mA or 1-5V
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -10°C to +50°C
  • Clean contact output for process, low battery or loss of signal alarm function
  • Up to 750m line-of-sight range when used with 3dBl antenna (up to 500m with standard 0dBl antenna)
  • Powered by 12-32Vdc supply

A range of auxilliary parts is available for the IWR-5 receiver, including DIN rail and wall mounting kits, upgraded 3dBl antenna, etc. - please speak to our technical sales team to discuss your requirements.

The below table gives the full specifications for the Cynergy3 IWR-5 wireless receiver:

Cynergy3 IWR-5 specifications

£0.00

Cynergy3 IWTTU Wireless Temperature Transducer Series - 1/4" NPT

The IWTTU series of wireless industrial temperature transducers from Cynergy3 utilises J or K type thermocouples or PT100 RTD sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.1% of the full scale, temperature coefficient of ±500ppm/°C and up to 750m line-of-sight range. The IWTTU series' user selectable features include transmission update rates, output (4-20mA or 1-5V), and configuration (single or 5 channel; depending on receiver used). The IWTTU series is designed to be paired with one of the iwr family of wireless receivers for simple plug-and-play temperature measurement solution; a compression fitting is available to allow easy alignment of the head with the receiver. The sensors are housed within a acetal body, making them suitable to use in harsh environments. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless temperature transducers
  • Selection of type J-type thermocouple (0-1200°C range), K-type thermocouple (0-1350°C range) or PT100 RTD sensor (-200 - +800°C range)
  • Acetal housing suitable for use in harsh environments
  • Accuracy <±0.1% of the full scale (non-linearity and hysteresis)
  • Operating temperature range (ambient temperature) of -20°C to 50°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" NPT male

The IWTTU series of temperature transducers is available in a range of input and sheath length options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWTTU pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWTTU series:

Cynergy3 IWTTU series specifications

£0.00