Industrial

Industrial
Show:
Sort By:

Cynergy3 IPS Pressure Transducer Series

The IPS series of ceramic industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPS pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and outputs (4-20mA, 0-100mV or 0-5V). Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -40°C to 135°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSP male

The IPS series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPS pressure transducer series include:

  • Various industrial applications

The below table gives the full specifications for each resistor model available including the Cynergy3 IPS series:

Cynergy3 IPS series specifications

£0.00

Cynergy3 IPSAT Intrinsically Safe Pressure Transducer Series

The IPSAT series of intrinsically safe industrial pressure transducers from Cynergy3 utilises piezo-resistive ceramic sensing technology to achieve excellent accuracy (<±0.25% of the full scale BFSL) and a microprocessor based amplifier for stability, making it an ideal device for industrial applications. The IPSAT pressure transducer is available with selection of pressure ratings (between -1 and 400 bar G) and 4-20mA output. Moreover, the sensor features stainless steel housing ensuring excellent media compatibility. Each device comes temperature compensated, calibrated and fully traceable. The IPSAT series of pressure transducers is fully ATEX and IECEx approved, making is suitable for applications in hazardous areas.

  • Intrinsically safe industrial pressure transducers
  • ATEX and IECEx approved for use in Zone 2 Hazardous Areas (Ex II 1G Ex ia IIC T4 Ga (Ta - see datasheet))
  • Piezo-resistive, thick-film, ceramic sensor
  • Stainless steel housing for excellent media compatibility
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (ambient temperature) of -40°C to 75°C
  • Excellent operational life at over 100x106 cycles
  • Process connection via 1/4" BSPP male (customisable)

The IPSAT series of intrinsically safe pressure transducers is available in several pressure range options, with further customisation available - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IPSAT pressure transducers series include:

  • Various industrial applications
  • Applications in Hazardous Areas

The below table gives the full specifications for each resistor model available including the Cynergy3 IPSAT series:

Cynergy3 IPS series specifications

£0.00

Cynergy3 IWPT Wireless Pressure Transducer Series

The IWPT series of wireless industrial pressure transducers from Cynergy3 utilises piezo-resistive thick film ceramic sensor to offer an excellent cost effective alternative to traditional wired transducers in inaccessible or expensive installation environments. The sensors feature accuracy as low as <±0.25% of the full scale (BFSL), selection of pressure ranges from -1 to +400 bar gauge and up to 750m line-of-sight range. The IWPT series' user selectable features include transmission update rates, output (1-5V or 4-20mA) and configuration (single or 5 channel; depending on receiver used). The IWPT series is designed to be paired with one of the IWR family of wireless receivers for simple plug-and-play pressure measurement solution; a swivel adaptor is available to allow easy alignment of the head with the receiver. The sensors are housed within a 316 stainless steel body, making them suitable to use with liquids and gases. Each device comes temperature compensated, calibrated and fully traceable.

  • Industrial wireless pressure transducers
  • Piezo-resistive, thick-film, ceramic sensor
  • 316 Stainless steel housing for excellent media compatibility (liquids and gases)
  • Accuracy <±0.25% of the full scale (BFSL)
  • Operating temperature range (media temperature) of -20°C to 135°C
  • Battery life up to 5 years with 10s update rate
  • Process connection via 1/4" BSP male

The IWPT series of pressure transducers is available in several output and pressure range options. Further customisation is available on this product - speak to our technical sales team to discuss your requirement.

Typical applications for the Cynergy3 IWPT pressure transducer series include:

  • Simple cable replacement installation - dispense with expensive cable runs
  • Environmental monitoring - pumping stations, sewage plants, water treatment etc.
  • Facilities management - boiler rooms, plant hydraulics, plant pneumatics
  • Asset monitoring - tank farms, process plants, HVAC and building management
  • Service contract - temporary installation for servicing and field trials

The below table gives the full specifications for each resistor model available including the Cynergy3 IWPT series:

Cynergy3 IWPT series specifications

£0.00

Emerson Paine™ 210-60-090 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID all in a small size. The 210-60-090 from Emerson is built with two separate sensing elements to measure the pressure at the input ports. This device has a very low thermal shift of ±0.01% of full scale per °C in the toughest environments and provides a differential output along with a uniquely small design. This transducer series is ideal for measuring differential pressure in many applications, such as actuator position feedback from servo valves to automotive and aviation testing environments.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Small, lightweight manifold style mounting for easy installation
  • Accuracy of P1=2mV/V ±10% and P2=P1 ±2% of P1
  • Output of mV/V
  • Operating media of any compatible with 300 series CRES, Buna-N-Rubber, 2024-T351 AL and PH CRES
  • Very low thermal sensitivity shift of ±0.01% of F.S. per °C
  • Temperature compensated design provides highly accurate pressure measurements
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Test stands and measurements
  • Robotic hydraulic controls
  • Industrial process systems
  • Positioning systems
  • Valve pressure control

Please see below the pressure table for the Paine™ 210-60-090 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-60-090 Specifications

£0.00

Emerson Paine™ 210-65-010 Series

The Paine™ 210-60-090 differential pressure transducer series from Emerson offers measuring pressure ranges from ±500 PSID up to ±5000 PSID. This transducer comes with two separate sensing elements to measure differential pressure at the input ports. This device is shock and vibration resistant, produces highly accurate measurements in harsh and demanding conditions. The 210-65-010 differential pressure transducer from Emerson is engineered to provide differential measurements in fire-resistant Skydrol® aviation hydraulic fluid applications.

  • Differential pressure transducer
  • Pressure ranges available from ±500 PSID up to ±5000 PSID
  • Compensated temperature −23°C to +121°C
  • Accuracy of P1 = 2.0mV/V (±10%) and P2 = P1 (±2% of P1)
  • Output of mV/V
  • Small, lightweight manifold style mounting for easy installation
  • Skydrol® aviation hydraulic fluid compatible
  • Very low Thermal sensitivity shift of ±0.01% of F.S. per °C
  • Shock and vibration resistant design offers highly accurate and reliable pressure monitoring in many operating conditions
  • Compact design for an easy-to-use differential measurement solution
  • Durable solution withstands harsh environments for long-lasting performance
  • Custom electrical connection and pressure port adapters are available on request

Potential applications for the Paine™ 210-60-090 series include:

  • Aviation and automotive test stands
  • Aerospace and aviation transportation motion simulators
  • Transportation steering control systems
  • Military weapon positioning systems
  • Actuators
  • Positioning systems

Please see below the pressure table for the Paine™ 210-65-010 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 210-65-010 Specifications

£0.00

Emerson Paine™ 220-30-020 Series

As a fully submersible device, the Paine™ 220-30-020 subsea pressure and temperature transmitter from Emerson is a reliable solution for pressure and temperature measurement in remote subsea systems. Offering pressure ranges of up to 15,000 PSIA and temperature measurements between -4°C up to +60°C, Emerson's Paine™ transmitter also features digital measurement accuracy and utilises the industry-standard CANopen® digital subsea instrumentation interface. With an all-welded design, this transmitter offers long-term subsea operation and meets the requirements of API 17F / ISO 13628-6 and CiA® 443 (SIIS level-2 device).

  • Subsea pressure and temperature transmitter
  • Pressure ranges available up to 0 - 15,000 PSIA (0 to 1034 BAR)
  • Operating temperature −4°C to +60°C
  • Resolution of 16 bits minimum (0.08 PSI for 5,000 PSI full scale)
  • Intelligent CANopen® digital subsea instrumentation interface delivers high resolution and reliability
  • Accuracy of 0.1%
  • Output CANopen® fault tolerant
  • Features micro subconn® MCBH4F subsea connector and all welded construction
  • Meets API 17F / ISO 13628-6 and CIA 443 (SIIS Level 2 device) requirements
  • Engineered with ⅜ inch female autoclave port fitting to meet industry-standard application requirements
  • Transmitter designed for consistent performance and digital measurement accuracy
  • Customisation options available for fit-for-use designs

Potential applications for the Paine™ 220-30-020 series include:

  • Subsea production & controls systems
  • Remote / extreme pressure monitoring
  • Corrosive environment pressure monitoring
  • Submersible subsea applications
  • ROV's & AUV's
  • Subsea valves and manifolds

Please see the below pressure table for the Paine™ 220-30-020 series, which includes details on standard products available as well as proof and burst pressure ratings:

Paine 220-30-020 Specifications

£0.00

Emerson Paine™ 320-10-010 Series

Engineered to provide digital measurement accuracy, Emerson's Paine™ 320-10-010 high precision pressure and temperature transmitter series is an ideal solution for new tool designs and retrofits. This transmitter from Emerson comes with digital network flexibility as well as programmability, and is fully compensated and calibrated for pressure ranges of up to 30,000 PSIA. This durable device withstands extreme conditions and is an ideal choice for down-hole drilling pressure and temperature measurement at temperatures of −40°C to +155°C.

  • High precision pressure and temperature transmitter
  • Pressure ranges available from 0 - 5,000 PSIA up to 0 - 30,000 PSIA
  • Operating temperature range of −40°C to +155°C
  • Calibrated temperature range of +23°C to +150°C
  • Total error of digital pressure output 0.04% full scale
  • Programmable temperature output: °C or °F
  • Digital output options of RS-232, RS-485, Modbus, CANbus, CANopen & SPI
  • Resistant to highly corrosive media
  • Process media which are fluids and gases compatible with NO7718, solution annealed and aged to a maximum hardness of 40 HRC
  • Withstands harsh and extreme environments for durability in tough applications
  • Fully compensated and calibrated to offer exceptional accuracy across high pressure ranges
  • Digital network provides flexibility and programmability for varying applications
  • Customisation options available for fit-for-use designs

Potential applications for the Paine™ 320-10-010 series include:

  • Down-hole tools (MWD, LWD< wireline and more)
  • Offshore energy exploration
  • Artificial lift and subsea risers
  • Industrial control systems and automation

Please see the datasheet in the Technical Library tab for the for Paine™ 320-10-010 series, which includes details on standard products available as well as proof and burst pressure ratings.

£0.00

Merit Sensor 3000 Series

The 3000 series low pressure MEMS pressure sensing elements from Merit SensorTM  is ideal for OEM applications, offering available pressure ranges of between 5psi and 100psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range from 75mV to 150mV (depending on the pressure range). The 3000 series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • Low pressure MEMS sensing elements
  • Pressure ranges available 5psi, 15psi, 30psi, 50psi and 100psi
  • Absolute and gauge options available
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 75mV at 5psi, 125mV at 100psi, 150mV at 15psi, 30psi and 100psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of open, half open and closed

Typical applications for the Merit SensorTM 3000 series include:

  • Industrial
  • Calibration devices
  • Pressure meters
  • Please see below the specifications for the Merit SensorTM 3000 series:

    Merit Sensor<sup>TM</sup> 3000 series Specifications

£0.00

Merit Sensor 5000 Series

The 5000 series high pressure MEMS sensing elements from Merit SensorTM is ideal for OEM applications, offering available pressure ranges of between 1,000psi and 10,000psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range of 125mV to 300mv (depending on the pressure range). The 5000 series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • High Pressure MEMS sensing elements
  • Pressure ranges available 1,000psi, 3,000psi, 5,000psi and 10,000psi
  • Absolute pressure type
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 125mV at 1,000psi, 180mV at 3,000psi, 200mV at 5,000psi and 1,000psi, 175mV at 500psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of open, half open or closed
  • AEC-Q100 qualification available upon request

Typical applications for the Merit SensorTM 5000 series include:

  • Industrial
  • Aerospace
  • Automotive
  • Consumer
  • Medical
  • Please see below the specifications for the Merit SensorTM 5000 series:

    Merit Sensor<sup>TM</sup> 5000 series Specifications

£0.00

Merit Sensor 7000 Series

The 7000 series broad pressure MEMS sensing elements from Merit SensorTM is ideal for broad medium OEM applications, offering available pressure ranges of between 15psi and 500psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range from 75mV or 175mv (depending on the pressure range). The 7000 series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • Broad pressure MEMS sensing elements
  • Pressure ranges available 15psi, 50psi, 100psi, 300psi and 500psi
  • Absolute or gauge options available
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 75mV at 15psi, 125mV at 50psi, 150mV at 100psi and 300psi, 175mV at 500psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of open, half open or closed
  • AEC-Q100 qualification available upon request

Typical applications for the Merit SensorTM 7000 series include:

  • Industrial
  • Aerospace
  • Automotive
  • Consumer
  • Medical
  • Please see below the specifications for the Merit SensorTM 7000 series:

    Merit Sensor<sup>TM</sup> 7000 series Specifications

£0.00

Merit Sensor AP Series

The AP series pressure sensor from Merit SensorTM is calibrated at room temperature using laser trimmed resistors. This pressure sensor series offers a pressure range from -15psi to 300psi with an operating temperature range of +10°C to +40°C and an accuracy of ±2% FSO. The AP series from Merit SensorTM utilises a piezoresistive Wheatstone bridge with a chemically etched silicon diaphragm and is suitable for high volume and low to medium-pressure applications.

  • Room temperature calibrated pressure sensor
  • Pressure range from -15 psi up to 300 psi (also available in higher pressures)
  • Burst pressure rating of 3x (full scale pressure)
  • Pressure type of gauge
  • Operating temperature range +10°C to +40°C
  • Accuracy of ±2 %FSO
  • Suitable for air, liquid and gas media compatibility
  • Custom options available

Typical applications for the Merit SensorTM AP series include:

  • Medical

Please see below the specifications for the Merit SensorTM TR series:

Merit Sensor<sup>TM</sup> AP series Specifications

* The combined effect of Sensitivity, Repeatability, Nonlinearity, and Hysteresis errors over the temperature range of 25°C to 15°C, and 25°C to 40°C, expressed as a percent of Full Scale pressure (%FS).

£0.00

Merit Sensor AP301 Series

The AP301 series medium pressure MEMS sensing elements from Merit SensorTM is ideal for OEM applications, offering available pressure ranges of between 100psi and 1000psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range of either 150mV or 175mv (depending on the pressure range). The AP301 series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • Medium pressure MEMS sensing elements
  • Pressure ranges available 100psi, 300psi, 500psi and 1000psi
  • Absolute and gauge options available
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 150mV at 100psi, 300psi and 1000psi, 175mV at 500psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of open, half open or closed
  • AEC-Q100 qualification upon request

Typical applications for the Merit SensorTM AP301 series include:

  • Industrial
  • Aerospace
  • Automotive
  • Consumer
  • Medical
  • Please see below the specifications for the Merit SensorTM AP301 series:

    Merit Sensor<sup>TM</sup> AP301 series Specifications

£0.00

Merit Sensor BP Series

The BP blood pressure sensor series from Merit SensorTM is ideal for low cost, high-volume, disposable medical applications including blood pressure monitoring. This blood pressure series offers a pressure range of -30mmHg to +300mmHg with an operating temperature range of 15°C to +40°C, and an accuracy of ±1% of the reading (-30mmHg to +50mmHg). The BP series from Merit SensorTM is temperature compensated, dielectric gel protected and can easily be installed into a customer’s pressure device housing  and utilises a piezoresistive Wheatstone bridge with a chemically etched silicon diaphragm.

  • Blood pressure sensor
  • Pressure range from -30 mmHg up to +300 mmHg
  • Excellent burst pressure
  • Operating temperature of +15°C to +40°C
  • Accuracy of ±1% of reading (-30 to +50 mmHg) and ±3% of reading (+50 to +3000 mmHg)
  • Compliant with AAMI BP22 specifications
  • Dielectric gel barrier
  • Fully tested
  • Solid state piezoresistive sensor
  • Suitable for air, gases and liquids

Typical applications for the Merit SensorTM BP series include:

  • Disposable blood pressure measurement
  • Kidney dialysis machines
  • Infusion pumps
  • Surgical procedures

Please see below the specifications for the Merit BP series:

Merit PB series Specifications

1. Assumes 6 VDC, 22°C and after five second warm-up unless otherwise specified.
2. Output of sensor with no pressure applied and a150 KΩ resistor shorted across + IN to + OUT.
3. Over a temperature range of 15°C to 40°C
4. Normalised offset/bridge voltage – 8 hours after 20 second warm-up
5. Combined effect of sensitivity, repeatability, non-linearity and hysteresis errors
6. Sterilisation performed by customer.

£0.00

Merit Sensor HM Series

The HM series harsh media pressure MEMS sensing elements from Merit SensorTM is ideal for low and medium OEM applications, offering available pressure ranges of between 15psi and 500psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range from 75mV or 175mv (depending on the pressure range). The HM series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • Broad pressure MEMS sensing elements
  • Pressure ranges available 15psi, 50psi, 100psi, 300psi and 500psi
  • Absolute pressurised from the cavity side or gauge pressurised from either side of the diaphragm
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 5V excitation) 75mV at 15psi, 150mV at 100psi, 135mV at 300psi and 175mV at 500psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for air, gases and liquids that are compatible with silicon and glass
  • Sawn wafer on tape in metal frame or die in waffle pack
  • Bridge options of closed or closed with temperature diode
  • AEC-Q100 qualified

Typical applications for the Merit SensorTM HM series include:

  • Industrial
  • Aerospace
  • Automotive
  • Medical
  • Please see below the specifications for the Merit SensorTM HM series:

    Merit Sensor<sup>TM</sup> HM series Specifications

£0.00

Merit Sensor J Series

The J series low pressure MEMS pressure sensing elements from Merit SensorTM  is ideal for OEM applications, offering available pressure ranges of between 1psi and 300psi. The sensors utilise a piezoresistive Wheatstone bridge in a design that anodically bonds glass to a chemically etched silicon diaphragm. This pressure sensor series offers an operating temperature of −40°C to +150°C and a full scale output range of 120mV (depending on the pressure range). The J series from Merit SensorTM products incorporate a proprietary Sentium® technology, developed to provide a best-in-class operating temperature range and superior stability.

  • Low pressure MEMS sensing elements
  • Pressure ranges available 3psi, 5psi, 15psi, 30psi, 50psi, 100psi 150psi and 300psi
  • 0.5mm, 0.89mm, 1.5mm gauge or 1.5mm absolute options available
  • Operating temperature −40°C to +150°C
  • Typical full scale output (at 1.5mA / 7.5V excitation) 120mV, 40mV at 1psi
  • Impedance of 5kΩ (typical) or 3.5kΩ (optional)
  • Suitable for clean, dry air and non-corrosive gases media
  • Sawn wafer on tape in metal frame
  • Bridge options of half open and closed

Typical applications for the Merit SensorTM J series include:

  • Industrial
  • Low level monitoring
  • Clean rooms
  • building automation
  • HVAC, airflow
  • Please see below the specifications for the Merit SensorTM J series:

    Merit Sensor<sup>TM</sup> J series Specifications

£0.00